Does Phoner support DSL?
Since version 1.66 supports VoIP. Speech connections to SIP
compatible devices can be established.
Using external SIP gateways it must be ensured, that firewalls
have port 5060 and 5062 opened.
Phoner has to work in SIP mode (Options/Communication).
What must be configured for VoIP?
Take a look at the Forum:
http://www.forum.phoner.de/YaBB.pl?num=1128696372
What are the charges for calls using Phoner?
There are the same charges using Phoner as using you normal ISDN phone
in CAPI mode (using ISDN card or USB adapter).
Using VoIP mode - there are the charges for the existing
internet connection. Additionally there the charges of the VoIP
provider for interconnections to other networks.
Does Phoner support modems?
No. Phoner supports both interfaces for PC telephony: CAPI and TAPI.
In theory modems are supported in TAPI mode, but most vendors don't
offer TAPI drivers with full duplex voice support. Therefore I gave up
to let Phoner work with modems.
How can I minimize the echo?
Avoid acoustic feedback: Your microphone shouldn't record what
playing your speakers. So avoid maximum volumes or use a headset
Wrong mixer settings: The microphone should be the only recording
device and should be disabled as plaing device
Delay is to large: Change the setting for block size at
"Options/Communication/CAPI" to a lower value. Keep in
mind, that external devices like USB adapters don't work well with
very small block sizes - there will be dropouts.
Try smaller volumes for recording and playing
|